S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
11-32
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 11 I Commands
interface iscsi
interface iscsi
To configure an iSCSI interface, use the
interface iscsi
command. To revert to default values, use the
no
form of the command.
interface iscsi
slot
/
port
mode
{
pass-thru
|
store-and-forward
}
tcp qos
value
interface iscsi
slot
/
port
no mode
{
pass-thru
|
store-and-forward
|
cut-thru
}
no tcp qos
value
no interface iscsi
slot
/
port
Syntax Description
Defaults
Disabled.
The TCP QoS default is 0.
The forwarding mode default is
store-and-forward
.
Command Modes
Configuration mode.
Command History
Usage Guidelines
To configure iSCSI interface, enable iSCSI using the
iscsi enable
command.
You can specify a range of interfaces by issuing a command with the following example format:
interface iscsi
space
fc1/1
space
-
space
5
space
,
space
fc2/5
space
-
space
7
Examples
The following example enables the iSCSI feature:
switch#
config t
switch(config)#
iscsi enable
slot/port
Specifies a slot number and port number.
mode
Configures a forwarding mode.
pass-thru
Forwards one frame at a time.
store-and-forward
Forwards data in one assembled unit (default).
cut-thru
Forwards one frame at a time without waiting for the exchange to complete.
tcp qos
value
Configures the differentiated services code point (DSCP)
value to apply to all outgoing IP packets. The range is 0 to 63.
Release
Modification
1.3(1)
This command was introduced.
2.1(1)
Added the
cut-thru
option for the
mode
subcommand.