![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253127.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-35
Cisco MDS 9000 Family Command Reference
OL-18089-02, Cisco MDS NX-OS Release 4.x
Chapter 2 A Commands
autonomous-fabric-id (IVR topology database configuration)
autonomous-fabric-id (IVR topology database configuration)
To configure an autonomous fabric ID (AFID) into the Inter-VSAN Routing (IVR) topology database,
use the
autonomous-fabric-id
command. To remove the fabric ID, use the
no
form of the command.
autonomous-fabric-id
fabric-id
switch-wwn
swwn
vsan-ranges
vsan-id
no autonomous-fabric-id
fabric-id
switch-wwn
swwn
vsan-ranges
vsan-id
Syntax Description
Defaults
None.
Command Modes
IVR topology database configuration submode.
Command History
Usage Guidelines
The following rules apply to configuring AFIDs to VSANs:
•
The default AFID of a VSAN is 1.
•
Each VSAN belongs to one and only one AFID.
•
A switch can be a member of multiple AFIDs.
•
AFIDs at a switch must not share any VSAN identifier (for example, a VSAN at a switch can belong
to only one AFID).
•
A VSAN identifier can be reused in different AFIDs, without merging the VSANs, as long as those
AFIDs do not share a switch.
You can have up to 64 VSANs (or 128 VSANs for Cisco MDS SAN-OS Release 2.1(1a) or later) in an
IVR topology. Specify the IVR topology using the following information:
•
The switch WWNs of the IVR-enabled switches.
•
A minimum of two VSANs to which the IVR-enabled switch belongs.
fabric-id
Specifies the fabric ID for the IVR topology.
Note
For Cisco MDS SAN-OS images prior to Release 2.1(1a), the
fabric-id
value is limited to
1.
For Releases 2.1(1a) and later
images, the
fabric-id
range is 1 to 64.
switch-wwn
swwn
Configures the switch WWN in dotted hex format.
vsan-ranges
vsan-id
Configures up to five ranges of VSANs to be added to the database.
The range is 1 to 4093.
Release
Modification
1.3(1)
This command was introduced.
2.1(1a)
Modified range for
fabric-id.