![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253469.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-119
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug
debug
To enable debugging for boot variables, use the
debug
command in EXEC mode. To disable a
debug
command, use the
no
form of the command or use the
no debug all
command to turn off all
debugging.
debug
{
aaa-request
|
aaa-request-lowlevel
|
all
|
config
|
config-lowlevel |
server-monitor | server-monitor-errors
}
no debug
{
aaa-request
|
aaa-request-lowlevel
|
all
|
config
|
config-lowlevel |
server-monitor | server-monitor-errors
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug config-lowlevel
command
is issued:
switch#
debug config-lowlevel
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: entering...
172.22.94.252# Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: exiting
Nov 20 06:39:44 tacacs: tacacs_conf_close: entering...
Nov 20 06:39:44 tacacs: tacacs_conf_close: returning 0
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: entering for Daemon debug
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: entering...
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: exiting
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ for Daemon debug with 1
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ done for Daemon debug
with 1
aaa-request
Enables AAA request debug.
aaa-request-lowlevel
Enables AAA request low-level debugging.
all
Enables all the debug flags.
config
Enables configuration debugging.
config-lowlevel
Enables configuring low-level debugging.
server-monitor
Enables server monitoring.
server-monitor-errors
Enables server monitor errors.
Release
Modification
1.3(1)
This command was introduced.
3.0(1)
Added the
server-monitor
and
server-monitor-errors
options.