S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-449
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show zone analysis
Num zones: 1
Num aliases: 0
Num attribute groups: 0
Formatted database size: < 1 Kb / 2000 kb ( < 1% usage)
Unassigned zones:
zone name z1 vsan 1
Table 22-13
describes the fields displayed in the output of a
show zone analysis
command for the full
zoning database.
Table 22-13
show zone analysis Field Descriptions for the Full Zoning Database
Field
Description
Last updated at
Displays a time stamp showing when the full zoning database was
last updated.
Last Updated by
Displays the agent that most recently modified the full zoning
database. The agent can be one of the following three types:
•
Local: indicates that the full database was last modified locally
through a configuration change from one of the following
applications:
–
CLI: The full zoning database was modified by the user
from the Command Line Interface.
–
SNMP: The full zoning database was modified by the user
through the Simple Network Management Protocol
(SNMP).
–
GS: The full zoning database was modified from the
Generic Services (GS) client.
–
CIM: The full zoning database was modified by the
applications using the Common Information Model (CIM).
–
INTERNAL: The full zoning database was modified as a
result of an internal activation either from Inter-VSAN
Routing (IVR) or from the IP Storage services manager.
•
Merge: indicates that the full database was last modified by the
Merge protocol. In this case, the interface on which the merge
occurred is also displayed.
•
Remote: indicates that the full database was last modified by
the Change protocol, initiated by a remote switch, when the full
zone set distribution was enabled. The domain, IP address, and
switch name of the switch initiating the change are also
displayed.
Note
The switch name is displayed on the next line, aligned with
the domain, only if the switch name is set. The default
switch name
switch
and the
ip-address
are not displayed.
Num zonesets
Displays the total number of zone sets in the database.
Num zones
Displays the total number of zones in the database, including
unassigned zones.