S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
14-2
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 14 L Commands
lifetime seconds
lifetime seconds
To configure the security association (SA) lifetime duration for an IKE protocol policy, use the
lifetime
seconds
command in IKE policy configuration submode. To revert to the default, use the
no
form of the
command.
lifetime seconds
seconds
no lifetime seconds
seconds
]
Syntax Description
Defaults
86,400 seconds.
Command Modes
IKE policy configuration submode.
Command History
Usage Guidelines
To use this command, the IKE protocol must be enabled using the
crypto ike enable
command.
The
lifetime seconds
command overrides the default.
Examples
The following example shows how to configure the SA lifetime duration for the IKE protocol:
switch#
config terminal
switch(config)#
crypto ike domain ipsec
switch(config-ike-ipsec)#
policy 1
switch(config-ike-ipsec-policy)#
lifetime seconds 6000
Related Commands
seconds
Specifies the lifetime duration in seconds. The range is 600 to 86400.
Release
Modification
2.0(x)
This command was introduced.
Command
Description
crypto ike domain ipsec
Enters IKE configuration mode.
crypto ike enable
Enables the IKE protocol.
policy
Configures IKE protocol policy.
show crypto ike domain ipsec
Displays IKE information for the IPsec domain.