S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-159
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show install all impact
show install all impact
To display the software compatibility matrix of a specific image, use the
show install all impact
command.
show install all impact
[
asm-sfn
image-filename
] [
kickstart
image-filename
] [
ssi
image-filename
]
[
system
image-filename
]
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
Use the
show install all impact
command to view the effect of updating the system from the running
image to another specified image.
switch#
show install all impact
Verifying image bootflash:/ilc1.bin
[####################] 100% -- SUCCESS
Verifying image bootflash:/vk73a
[####################] 100% -- SUCCESS
Verifying image bootflash:/vs73a
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting “system” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
asm-sfn
Specifies the ASM SFN boot variable.
image-filename
Specifies the name of an image.
kickstart
Specifies the kickstart boot variable.
ssi
Specifies the SSI boot variable.
system
Specifies the system boot variable.
Release
Modification
1.2(1)
This command was introduced.