S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-55
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show crypto transform-set domain ipsec
show crypto transform-set domain ipsec
To display transform set information for IPsec, use the
show crypto transform-set domain ipsec
command.
show crypto transform-set domain ipsec
[
set-name
]
Syntax Description
Defaults
Displays information for all transform sets.
Command Modes
EXEC mode.
Command History
Usage Guidelines
To use this command, IPsec must be enabled using the
crypto ipsec enable
command.
Examples
The following example shows how to display information for all IPsec transform sets:
switch#
show crypto transform-set domain ipsec
Transform set: ipsec_default_transform_set {esp-aes-256-ctr esp-aes-xcbc-mac}
will negotiate {tunnel}
Related Commands
set-name
(Optional) Specifies the transform set name. Maximum length is 63
characters.
Release
Modification
2.0(x)
This command was introduced.
Command
Description
crypto ipsec enable
Enables IPsec.
crypto transform-set
domain ipsec
Configures IPsec transform set information.
