S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
18-29
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 18 P Commands
port-track enable
port-track enable
To enable port tracking for indirect errors, use the
port-track enable
command
in configuration mode.
To disable this feature, use the
no
form of the command.
port-track enable
no port-track enable
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
The software brings the linked port down when the tracked port goes down. When the tracked port
recovers from the failure and comes back up again, the tracked port is also brought up automatically
(unless otherwise configured).
Examples
The following example shows how to enable port tracking.
switch#
config terminal
switch(config)#
port-track enable
The following example shows how to disable port tracking.
switch#
config terminal
switch(config)#
no port-track enable
Related Commands
Release
Modification
2.0(x)
This command was introduced.
Command
Description
show interface fc
Displays configuration and status information for a specified Fibre Channel
interface.
show interface
port-channel
Displays configuration and status information for a specified PortChannel
interface.