![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_212531528.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
23-6
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 23 T Commands
tacacs-server deadtime
tacacs-server deadtime
To set a periodic time interval where a nonreachable (nonresponsive) server is monitored for
responsiveness, use the
tacacs-server deadtime
command. To disable the monitoring of the
nonresponsive server, use the
no
form of the command.
tacacs-server deadtime
time
no tacacs-server deadtime
time
Syntax Description
Defaults
Disabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Setting the time interval to zero disables the timer. If the dead time interval for an individual
server is greater than zero (0), that value takes precedence over the value set for the server group.
When the dead time interval is 0 minutes, server monitoring is not performed unless the
server is part of a server group and the dead time interval for the group is greater than 0
minutes.
Examples
The following example shows how to set a duration of 10 minutes.
switch#
config terminal
switch(config)#
tacacs-server deadtime 10
Related Commands
time
Specifies the time interval in minutes. The range is 1 to 1440.
Release
Modification
3.0(1)
This command was introduced.
Command
Description
deadtime
Sets a time interval for monitoring a nonresponsive server.
show tacacs-server
Displays all configured server parameters.