S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
19-8
Cisco MDS 9000 Family Command Reference
OL-18089-01 Cisco MDS NX-OS Release 4.x
Chapter 19 Q Commands
qos service
qos service
To apply a service policy
,
use the
qos service
command in configuration mode. To remove a
previously-configured class, use the
no
form of the command.
qos service policy
policy-name
vsan
vsan-id
no qos service policy
policy-name
vsan
vsan-id
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
You can access this command only if you enable the QoS data traffic feature using the
qos enable
command.
Examples
The following example applies a configured policy to VSAN 3.
switch(config)#
qos service policy MyPolicy vsan 3
Operation in progress. Please check policy-map parameters
The following example deletes a configured policy that was applied to VSAN 7.
switch(config)#
no qos service policy OldPolicy vsan 7
Operation in progress. Please check policy-map parameters
Related Commands
policy
policy-name
Associates a policy map with the VSAN.
vsan
vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Release
Modification
1.3(1)
This command was introduced.
Command
Description
show qos
Displays configured QoS information.