S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-319
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show port-monitor active
show port-monitor active
To display the details of all operationally active policies, use the
show port-monitor
active
command.
show port-monitor active
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
Policies can be either operationally active or administratively active as shown by the
show Port-monitor
active
command. An administratively active policy is not active on the line card and can be activated
operationally by enabling the port monitor.
Examples
The following example shows how to display the details of all operationally active policies:
switch#
show port-monitor active
Policy Name : default
Admin status : Active
Oper status : Active
Port type : All Ports
------------------------------------------------------------------------------------------
Counter Threshold Interval Rising Threshold event Falling Threshold event In
Use
------- --------- -------- ---------------- ----- ------------------ -----
------
Link Loss Delta 60 5 4 1 4 Yes
Sync Loss Delta 60 5 4 1 4 Yes
Protocol Error Delta 60 1 4 0 4 Yes
Signal Loss Delta 60 5 4 1 4 Yes
Invalid Words Delta 60 1 4 0 4 Yes
Invalid CRC's Delta 60 5 4 1 4 Yes
RX Performance Delta 60 2147483648 4 524288000 4 Yes
TX Performance Delta 60 2147483648 4 524288000 4 Yes
State Change Delta 60 1 4 0 4 Yes
------------------------------------------------------------------------------------------
switch#
Release
Modification
NX-OS 4.1(1b)
This command was introduced.
