S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
21-38
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 21 S Commands
sme
sme
To enable or disable the Cisco SME services, use the
sme
command.
sme
{
cluster
name
| transport ssl trustpoint
trustpoint label
}
Syntax Description
Defaults
Disabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Cisco SME services must be enabled to take advantage of the encryption and security features.
To use this command, you must enable Cisco SME clustering using the
feature cluster
command.
Examples
The following example shows how to configure a cluster:
switch#
config t
sw-sme-n1(config)#
sme cluster clustername
sw-sme-n1(config-sme-cl)#
cluster
Configures the cluster.
name
Identifies the cluster name.
transport
Configures the transport information.
ssl
Configures the transport SSL information.
trustpoint
Configures the transport SSL trustpoint.
trustpoint label
Identifies the trustpoint label.
Release
Modification
3.2(2c)
This command was introduced.