S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
14-7
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 14 L Commands
line console
Parity none.
Default init string.
Command Modes
Configuration mode.
Command History
Usage Guidelines
The
line console
command available in
config t
command mode. The
line console
configuration
commands are available in
config-console
submode.
When setting the
speed
option, be sure to specify one of the exact values.
Examples
The following example configures a line console and sets the options for that terminal line:
switch
#
#
config terminal
switch(config)
#
#
switch(config)#
line console
switch(config-console)#
databits 60
switch(config-console)#
exec-timeout 60
switch(config-console)#
flowcontrol software
switch(config-console)#
parity even
switch(config-console)#
stopbits 1
The following example disables the current modem from executing its functions:
switch#
config terminal
switch(config)#
line console
switch(config-console)#
no modem in
The following example enables (default) the COM1 port to only connect to a modem:
switch#
config terminal
switch(config)#
line console
switch(config-console)#
modem in
The following example Writes the provides initialization string to the modem. This is the default:
switch#
config terminal
switch(config)#
line console
switch(config-console)#
modem init-string default
The following example assigns the user-specified initialization string to its corresponding profile:
switch#
config terminal
switch(config)#
line console
switch(config-console)#
modem set-string user-input ATE0Q1&D2&C1S0=3\015
Release
Modification
1.2(2)
This command was introduced.
3.0(1)
Modified the
speed
option by specifying speeds for the Supervisor-1
module and Supervisor-2 module.
