![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_212531057.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
21-119
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 21 S Commands
system health module
switch(config)#
system health module 6 bootflash failure-action
System health failure action for module 6 Bootflash test is already enabled.
The following example disables the bootflash test configuration.
switch(config)#
no system health module 6 bootflash failure-action
System health failure action for module 6 Bootflash test is now disabled.
The following example sets the new frequency of the bootflash test to 200 seconds.
switch(config)#
system health module 6 bootflash frequency 200
The new frequency is set at 200 Seconds.
The following example enables the EOBC test.
switch(config)#
system health module 6 eobc
System health for module 6 EOBC is now enabled.
The following example enables the inband test.
switch(config)#
system health module 6 inband
System health for module 6 EOBC is now enabled.
The following example enables the loopback test.
switch(config)#
system health module 6 loopback
System health for module 6 EOBC is now enabled.
The following example enables the management test.
switch(config)#
system health module 6 management
System health for module 6 EOBC is now enabled.
The following example shows how to set the CompactFlash CRC test interval.
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
system health module 6 cf-crc-check frequency 10
The following example shows how to set the CompactFlash CRC test
failure-action
feature.
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
system health module 6 cf-crc-check failure-action
The following example shows how to set the CompactFlash reflash update interval.
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
system health module 6 cf-reflash frequency 10
The following example shows how to set the CompactFlash reflash
failure-action
feature.
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
system health module # cf-re-flash failure-action
Related Commands
Command
Description
show system health
Displays system health information.
show system health
statistics
Displays system health statistics.