S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-317
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show port-monitor
show port-monitor
To configure the counter details of the policy, use the
show port-monitor
command.
show port-monitor [
name
]
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
The
show port-monitor
command can also take a string name of policy and displays the details of that
policy only.
Examples
The following example shows how to display the counter details of the policy.
switch# show port-monitor cisco
Policy Name : cisco Status : Not Active
Port type : All Ports
Counter Threshold Interval Rising Threshold Falling Threshold Status
------- --------- -------- ---------------- ------------------ ------
Link Loss Delta 60 5 1 Active
Sync Loss Delta 60 5 1 Active
Protocol Error Delta 60 1 0 Active
Signal Loss Delta 60 5 1 Active
Invalid Words Delta 60 1 0 Active
Invalid CRC's Delta 263635064 3 4 Active
RX Performance Delta 60 2147483648 524288000 Active
TX Performance Delta 60 2147483648 524288000 Active
State Change Delta 60 1 0 Active
-------------------------------------------------------------------------------
switch#
Related Commands
name
Displays a policy name.
Release
Modification
4.1(1b)
This command was introduced.
Command
Description
show port-monitor
Shows port monitor policies.
