![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253035.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
xxxiii
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
New and Changed Information
Table 1
summarizes the new and changed commands for Cisco MDS NX-OS Release 4.1(3) and tells
you where they are documented in the
Cisco MDS 9000 Family Command Reference
.
The
Cisco MDS 9000 Family Command Reference
applies to Cisco NX-OS Release 4.1(3), but describes
all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an
MDS switch, refer to the
Cisco MDS 9000 Family CLI Command Reference
for the release train that
applies to the release on your switch.
Note
As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases
before 4.1(1b) still apply.
Table 1
New and Changed Commands in the Cisco MDS 9000 Family Command Reference
Feature
Description
Where Documented
New and Changed Commands for Cisco NX-OS Release 4.1(3)
Call Home
destination-profile
command
(Added the HTTPs URL and transport method
to the syntax description)
D Commands
Port Guard
errdisable detect cause link-down
command
E Commands
Port Owner
switchport owner
command
S Commands
F port Trunking
feature
command
(Added features
hhtp-server
,
fport-channel-trunk
,
npiv
and
npv
to the
syntax description)
F Commands
switchport
command
(Added the
F
and
NP
port mode)
S Commands
show flogi database interface
command
Show Commands