S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
21-100
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 21 S Commands
system delayed-traps timer
system delayed-traps timer
To configure the system-delayed trap timeout values, use the
system delayed-traps timer
command. To
disable the system-delayed trap timeout values, use the
no
form of the command.
system delayed traps-timer {
number
}
no system delayed traps-timer {
number
}
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
System delayed traps timer is optional. If the user does not provide the timer value, default value of 4 is
applied.
Examples
The following example shows how to configure system-delayed trap values:
switch(config)#
system delayed-traps timer 30
switch(config)#
number
Indicates the delayed trap timer in minutes. The range is from 1 to 60.
Release
Modification
NX-OS 4.1(1b)
This command was introduced.
