S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-59
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug idehsd
debug idehsd
To enable IDE hot swap handler debugging, use the
debug idehsd
command in EXEC mode. To disable
a
debug
command, use the
no
form of the command or use the
no debug all
command to turn off all
debugging.
debug idehsd
{
cmd dbglevel
[
debug-level
]
|
error
|
flow
}
no debug idehsd
{
cmd dbglevel
[
debug-level
]
|
error
|
flow
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug idehsd cmd dbglevel
command is
issued:
switch#
debug idehsd cmd dbglevel 5
set debug level to 5 succeeded
Related Commands
cmd dbglevel
Enables debugging for the IDE hot swap handler.
debug-level
(Optional) Specifies the debug level (0 to 8).
error
Enables debugging for IDE hot swap handler error conditions.
flow
Enables debugging for IDE hot swap handler flow.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.
