S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-78
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug mcast
debug mcast
To enable debugging for multicast definitions, use the
debug mcast
command in EXEC mode. To disable
a
debug
command, use the
no
form of the command or use the
no debug all
command to turn off all
debugging.
debug mcast
{
all
|
error
[
vsan
vsan-id
] [
interface fc
slot
/
port
] |
event
[
vsan
vsan-id
] [
interface fc
slot
/
port
]
|
mts {pkt
{
both
|
rx
[
node
range
|
opcode
range
|
sap
range
] |
tx
}
|
pkthdr
{
both
|
rx
[
numpkt
range
] |
tx
}}
|
trace
[
vsan
vsan-id
]
[
interface fc
slot
/
port
]]
no debug mcast
{
all
|
error
[
vsan
vsan-id
]
[
interface fc
slot
/
port
]
|
event
[
vsan
vsan-id
]
[
interface
fc
slot
/
port
]
|
mts {pkt
{
both
|
rx
[
node
range
|
opcode
range
|
sap
range
] |
tx
}
|
pkthdr
{
both
|
rx
[
numpkt
range
] |
tx
}}
|
trace
[
vsan
vsan-id
] [
interface fc
slot
/
port
]]
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
all
Enables debugging for all multicast definitions.
error
Enables debugging for multicast errors.
vsan
vsan-id
(Optional) Restricts debugging to the specified VSAN.
interface fc
slot/port
(Optional) Restricts debugging to the specified interface.
event
Enables debugging for multicast events.
mts
Enables debugging for multicast tx/rx MTS events.
pkt
Specifies debugging of packets.
both
Specifies debugging in both the transmit and receive direction.
rx
Specifies debugging in the receive direction.
node
range
Specifies the node for the packets in the receive direction. The integer
range is from 1 to 4096.
opcode
range
Specifies the opcode for the packets in the receive direction. The integer
range is from 1 to 4096.
sap
range
Specifies the sap for the packets in the receive direction.The integer
range is from 1 to 4096.
tx
Specifies debugging in the transmit direction,
pkthdr
Specifies debugging of headers.
numpkt
Specifies the number of required packets.
trace
Enables debugging for multicast traces.
Release
Modification
1.0(2)
This command was introduced.