![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253330.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
5-38
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands
dmm module
dmm module
To specify default DMM values for migration block size, number of migration blocks and fast migration
speed, use the
dmm module
command in configuration mode.
dmm module
mod-id
rate-of-migration fast
migration-rate
medium
migration-rate
slow
migration-rate
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to set the fast migration rate to 100 MB/s, the medium migration rate
to 50 MB/s, and slow migration rate to 10 MB/s:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)
dmm module 3 rate_of_migration fast 100 medium 50 slow 10
mod-id
Specifies the module ID.
rate-of-migration
Migration rate can be configured as slow, medium or fast.
fast
migration-rate
Specifies the rate for fast migration. Units are megabytes per
second (MB/s).
medium
migration-rate
Specifies the rate for medium migration. Units are MB/s.
slow
migration-rate
Specifies the rate for slow migration. Units are MB/s.
Release
Modification
3.2(1)
This command was introduced.