S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-100
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug rlir
debug rlir
To enable Registered Link Incident Report (RLIR) debugging, use the
debug rlir
command in EXEC
mode. To disable a
debug
command, use the
no
form of the command or use the
no debug all
command
to turn off all debugging.
debug rlir
{
all
|
errors
|
events
|
mts-errors
|
mts-events
}
no debug rlir
{
all
|
errors
|
events
|
mts-errors
|
mts-events
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug rlir all
command is issued:
switch#
debug rlir all
Related Commands
all
Enables debugging for all RLIR features.
errors
Enables debugging for RLIR error conditions.
events
Enables debugging for the RLIR events.
mts-errors
Enables debugging for MTS error conditions.
mts-events
Enables debugging for MTS events.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.
show rlir
Displays information about RLIR, Link Incident Record Registration
(LIRR), and Distribute Registered Link Incident Record (DRLIR) frames.