![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253521.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
8-17
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 8 F Commands
fcc priority
fcc priority
To assign the FCC priority to the entire switch, use the
fcc priority
command in configuration mode. To
revert to the default, use the
no
form of the command.
fcc priority
number
no fcc priority
number
Syntax Description
Defaults
The default priority is 4.
Command Modes
Configuration mode.
Command History
Usage Guidelines
FCC reduces the congestion in the traffic without interfering with standard Fibre Channel protocol.
Note
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples
The following example shows how to configure the FCC priority threshold as 2.
switch#
config terminal
switch(config)#
fcc priority 2
Related Commands
number
The FCC priority threshold. The range is 0 to 7, where 0 is the lowest priority
and 7 the highest priority.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
show fcc
Displays FCC settings.