S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
5-58
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands
duplicate-message throttle
duplicate-message throttle
To enable throttling of duplicate Call Home alert messages, use the
duplicate-message throttle
command in Call Home configuration submode. To disable this feature, use the
no
form of the command.
duplicate-message throttle
no duplicate-message throttle
Syntax Description
This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes
Call Home configuration submode.
Command History
Usage Guidelines
The rate of throttling is a maximum of thirty messages in 2 hours.
Examples
The following example shows how to enable throttling of duplicate Call Home alert messages:
switch#
config terminal
switch(config)#
callhome
switch(config-callhome)#
duplicate-message throttle
Related Commands
Release
Modification
2.0(x)
This command was introduced.
Command
Description
callhome
Configures the Call Home function.
callhome test
Sends a dummy test message to the configured destination(s).
show callhome
Displays configured Call Home information.