S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
11-105
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 11 I Commands
islb initiator
islb initiator
To configure the iSCSI server load balancing (iSLB) initiator and enter iSLB initiator configuration
submode, use the
islb initiator
command. To delete the configured ISLB initiator, use the
no
form of
the command.
islb initiator
{
ip-address
{
ip-address
|
ipv6-address
}
| name
name
}
no islb initiator name
name
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
You can use the
islb initiator
command to enter iSLB initiator configuration submode to configure static
mapping for an iSLB initiator.
Examples
The following example enters iSLB initiator configuration submode to configure static mapping (using
the IPv4 ip-address option) for an iSLB initiator.
switch#
config t
switch(config)#
islb initiator ipaddress 10.1.2.3
switch(config-islb-init)#
The following example deletes the configured iSLB initiator.
switch(config)#
no islb initiator ipaddress 10.1.2.3
The following example enters iSLB initiator configuration submode to configure static mapping (using
the IPv6 option) for an iSLB initiator.
switch#
config t
switch(config)#
islb initiator ipaddress 1111.2222.3333.4::5
switch(config-islb-init)#
The following example deletes the configured iSLB initiator.
switch(config)#
no islb initiator ipaddress 1111.2222.3333.4::5
ip-address
Specifies the iSLB initiator node IP address.
ip-address
Specifies the initiator IPv4 address.
ipv6-address
Specifies the initiator IPv6 address.
name
name
Specifies the iSLB initiator node name. The maximum size is 223.
Release
Modification
3.0(1)
This command was introduced.
