S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
14-6
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 14 L Commands
line console
line console
To configure a terminal line
,
use the
line console
command. To negate the previously issued command
or to revert to factory defaults, use the
no
form of the command.
line console -->
databits
number
|
exec-timeout
minutes
|
modem
{
in | init-string | set-string user-input
}
|
parity
{
even | none | odd
} |
speed
speed
|
stopbits
{
1 | 2
}
line console -->
no databits
number
|
no exec-timeout
minutes
|
no modem
{
in | init-string
{
default | user-input
}
| set-string user-input
string
}
|
no parity
{
even | none | odd
} |
no speed
speed
|
no stopbits
{
1 | 2
}
Syntax Description
Defaults
9600 Baud.
8 databits.
1 stopbit.
databits
number
Specifies the number of databits per character. The range is 5 to 8.
exec-timeout
minutes
Configure exec timeout in minutes. The range is 0 to 525,600. To disable, set
to 0 minutes.
modem
Enables the modem mode.
in
Enables the COM 1 port to only connect to a modem.
init-string default
Writes the default initialization string to the modem.
set-string user-input
string
Sets the user-specified initilization string to its corresponding profile.
Maximum length is 80 characters.
init-string user-input
Writes the provided initialization string to the modem.
parity
Sets terminal parity.
even
Sets even parity.
none
Sets no parity.
odd
Sets odd parity.
speed
speed
Sets the transmit and receive speeds. Valid values for Supervisor-1 modules
are between 110 and 115,200 bps (110, 150, 300, 600, 1200, 2400, 4800,
9600, 19200, 28800, 38400, 57600, 115200). Valid values for Supervisor-2
modules are 9600, 19200, 38400, and 115200.
stopbits
Sets async line stopbits.
1
Sets one stop bit.
2
Sets two stop bits.