S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-37
Cisco MDS 9000 Family Command Reference
OL-18089-02, Cisco MDS NX-OS Release 4.x
Chapter 2 A Commands
autonomous-fabric-id (IVR service group configuration)
autonomous-fabric-id (IVR service group configuration)
To configure an autonomous fabric ID (AFID) into an IVR service group, use the
autonomous-fabric-id
command in IVR service group configuration submode. To remove the autonomous fabric ID, use the
no
form of the command.
autonomous-fabric-id
afid
vsan-ranges
vsan-id
no autonomous-fabric-id
afid
vsan-ranges
vsan-id
Syntax Description
Defaults
None.
Command Modes
IVR service group configuration submode.
Command History
Usage Guidelines
Before configuring an IVR service group, you must enable the following:
•
IVR using the
ivr enable
command
•
IVR distribution using the
ivr distribute
command
•
Automatic IVR topology discovery using the
ivr vsan-topology auto
command
To change to IVR service group configuration submode, use the
ivr service-group activate
command.
Examples
The following command enters the IVR service group configuration submode and configures AFID 10
to be in IVR service group serviceGroup1:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ivr enable
switch(config)#
ivr distribute
switch(config)#
ivr vsan-topology auto
switch(config)#
ivr service-group name serviceGroup1
switch(config-ivr-sg)#
autonomous-fabric-id 10 vsan 1-4
afid
Specifies the AFID to the local VSAN.
vsan-ranges
vsan-id
Configures up to five ranges of VSANs to be added to the service
group. The range is 1 to 4093.
Release
Modification
2.1
This command was introduced.