S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-251
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show kernel core
show kernel core
To display kernel core configuration information, use the
show kernel core
command.
show kernel core
{
limit
|
module
slot
|
target
}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following examples display kernel core settings.
switch#
show kernel core limit
2
switch#
show kernel core target
10.50.5.5
switch#
show kernel core module 5
module 5 core is enabled
level is header
dst_ip is 10.50.5.5
src_port is 6671
dst_port is 6666
dump_dev_name is eth1
dst_mac_addr is 00:00:0C:07:AC:01
limit
Displays the configured line card limit.
module
slot
Displays the kernel core configuration for a module in the specified slot.
target
Displays the configured target IP address.
Release
Modification
1.1(1)
This command was introduced.