![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253902.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
20-12
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 20 R Commands
rate-mode bandwidth-fairness
rate-mode bandwidth-fairness
To enable or disable bandwidth fairness among ports in a port group
,
use the
rate-mode
bandwidth-fairness
command in configuration mode. To disable bandwidth fairness, use the
no
form
of the command.
rate-mode bandwidth-fairness module
module-id
no rate-mode bandwidth-fairness module
module-id
Syntax Description
Defaults
Enabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Enter the command separately for each module you want to enable or disable bandwidth fairness.
Note
This feature is only supported on 48-port and 24-port 4-Gbps Fibre Channel switching modules.
Examples
The following example shows how to enable bandwidth fairness for a module.
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
rate-mode bandwidth-fairness module 1
The following example shows how to disable bandwidth fairness for a module.
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
no rate-mode bandwidth-fairness module 1
Related Commands
module
module-id
Specifies the module number.
Release
Modification
3.1(2)
This command was introduced.
Command
Description
show module
bandwidth-fairness
Displays bandwidth fairness status.