S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
5-33
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands
discover
discover
To initiate the discovery of hosts, use the
discovery
command. To disable this feature, use the
no
form
of the command.
discover host
host port
target
target port
vsan
vsan id
fabric
fabric name
no discover
Syntax Description
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example discovers a host and specifies a target, a VSAN, and a fabric for discovery:
switch#
config t
switch(config)#
sme cluster clustername1
switch(config-sme-cl)#
discover host 20:00:00:00:c9:49:28:47 target
21:01:00:e0:8b:29:7e:0c vsan 2345 fabric sw-xyz
The following example disables the discovery feature:
switch#
config t
switch(config)#
sme cluster clustername1
switch(config-sme-cl)#
no discover
Related Commands
host
host port
Identifies the host port WWN. The format is
hh:hh:hh:hh:hh:hh:hh:hh.
target
target port
Identifies the target port WWN. The format is
hh:hh:hh:hh:hh:hh:hh:hh
.
vsan
vsan id
Selects the VSAN identifier. The range is 1 to 4093.
fabric
fabric name
Specifies the fabric for discovery.The maximum length is 32 characters.
Release
Modification
3.2(2)
This command was introduced.
Command
Description
show sme cluster
Displays information about the Cisco SME cluster.