S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-108
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show fc-redirect peer-switches
show fc-redirect peer-switches
To display all the peer switches in the fabric running FC-Redirect, use the
show fc-redirect
peer-switches
command.
show fc-redirect peer-switches
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
EXEC mode
Command History
Usage Guidelines
This command is used to verify the fabric state and is used for troubleshooting.
Note
To find the switch IP address for the list of switch WWNs, use the
show cfs peers
command.
Examples
The following example displays the peer switches in the fabric running FC-Redirect
switch#
show fc-redirect peer-switches
-----------------------------------------------------------------
num Switch WWN State FCR-Ver Cfg-Mode
-----------------------------------------------------------------
1 20:00:00:0d:EC:20:13:00 UP 2 V2
Table 22-3
describes the output for the
show fc-redirect peer-switches
states.
Release
Modification
3.2(1)
This command was introduced.
3.3(1a)
Added the FC-Redirect version of the switch and configuration mode to the
command output.
Table 22-3
Show FC-Redirect Peer Switch States
State
Description
Up
The peer switch is fully synchronized with the
local switch.
Down
The communication with the peer switch is not
available.
Syncing
The local switch is synchronizing its
configuration with the peer switch.
Error
Connection with peer switch is not available.