S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-109
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug security
debug security
To enable debugging for the security and accounting features, use the
debug security
command in
EXEC mode. To disable a
debug
command, use the
no
form of the command or use the
no debug all
command to turn off all debugging.
debug security
{
all
|
events
|
mts
|
radius
}
no debug security
{
all
|
events
|
mts
|
radius
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug security radius
command is issued:
switch#
debug security radius
Mar 5 00:51:13 securityd: RADIUS is enabled, hence it will be tried first for CHAP
authentication
Mar 5 00:51:13 securityd: reading RADIUS configuration
Mar 5 00:51:13 securityd: opening radius configuration for group:default
Mar 5 00:51:13 securityd: opened the configuration successfully
Mar 5 00:51:13 securityd: GET request for RADIUS global config
Mar 5 00:51:13 securityd: got back the return value of global radius configuration
operation:success
Mar 5 00:51:13 securityd: closing RADIUS pss configuration
Mar 5 00:51:13 securityd: opening radius configuration for group:default
Related Commands
all
Enables debugging for all security features.
events
Enables debugging for security events.
mts
Enables debugging for security MTS packets.
radius
Enables debugging for RADIUS events.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.
