S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
21-5
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 21 S Commands
santap module
Command History
Usage Guidelines
To access this command, you must first enable the SANTap feature on the SSM using the
ssm enable
feature
command.
When the
lun-size-handling
option is set (enabled), the maximum logical block addressing (LBA) for
DVT LUN is set to 2 TB. As a result, there is no issue with LUN resizing.
Note
You can delete dvt target-pwwn using the
no santap module
slot
dvt
target-pwwn
command. Other dvt
options are not supported by the
no
form of the command.
Examples
The following example shows the configuration of the SSM where the SANTap feature is enabled and
the VSAN used to communicate with the appliance.
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
santap module 1 appl-vsan 1
Related Commands
Release
Modification
2.1(1a)
This command was introduced.
3.0(1)
Added the following options:
cvt-name
,
dvt
,
target-pwwn
,
target-vsan
,
dvt-name
,
dvt-vsan
,
dvt-port
,
lun-size-handling
, and
io-timeout
.
Command
Description
ssm enable feature
Enables the SANTap feature on the SSM.
show santap module
Displays the configuration and statistics of the SANTap feature.