S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
27-19
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 27 Z Commands
zone-attribute-group name
zone-attribute-group name
To create and configure a zone attribute group for enhanced zoning, use the
zone-attribute-group name
command
in configuration mode.
To remove the zone attribute group, use the
no
form of the command.
zone attribute group name
zone-name
vsan
vsan-id
no zone attribute group name
zone-name
vsan
vsan-id
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
You can use this command to create a zone attribute group and to modify an existing zone attribute
group.
Zone attribute groups are only supported for enhanced zoning. You can enable enhanced zoning using
the
zone mode enhanced vsan
command.
Examples
The following example shows how to create a zone attribute group and enter attribute group
configuration submode.
switch#
config terminal
switch(config)#
zone-attribute-group name admin-attributes vsan 10
switch(config-attribute-group)#
Related Commands
zone-name
Specifies the zone attribute name. Maximum length is 64 characters.
vsan
vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Release
Modification
2.0(x)
This command was introduced.
Command
Description
show zone-attribute-group
Displays zone attribute group information.
zone mode enhanced vsan
Enables enhanced zoning for a VSAN.