S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-352
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show san-ext-tuner
show san-ext-tuner
To display SAN extension tuner information, use the
show
san-ext-tuner
command.
show san-ext-tuner
{
interface gigabitethernet
slot
/
port
[
nport
pwwn
pwwn-id
vsan
vsan-id
counters
] |
nports
}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to display SAN extension tuner N port information.
switch#
show san-ext-tuner nports
Related Commands
interface
Displays SAN extension tuner information for a specific Gigabit Ethernet
interface.
gigabitethernet
slot
/
port
Specifies a Gigabit Ethernet interface.
nport
Specifies an N port.
pwwn
pwwn-id
Specifies a pWWN ID. The format is
hh
:
hh
:
hh
:
hh
:
hh
:
hh
:
hh
:
hh
, where
h
is
a hexadecimal number.
vsan
vsan-id
Specifies a VSAN ID. The range is 1 to 4093.
counters
Specifies SAN extension tuner counters.
nports
Displays SAN extension tuner information for all nports.
Release
Modification
2.0(x)
This command was introduced.
Command
Description
san-ext-tuner
Enters SAN extension tuner configuration mode.