S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-64
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug ipfc
debug ipfc
To enable IP over Fibre Channel (IPFC) debugging, use the
debug ipfc
command in EXEC mode. To
disable a
debug
command, use the
no
form of the command or use the
no debug all
command to turn
off all debugging.
debug ipfc
{
all
|
errors
|
events
|
info
|
kernel
{
errors
|
events
}}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug ipfc kernel errors
command is
issued:
switch#
debug ipfc kernel errors
Related Commands
all
Enables debugging for all IPFC features.
errors
Enables debugging for IPFC error conditions.
events
Enables debugging for IPFC tx/rx MTS events.
info
Enables debugging for IPFC information.
kernel
Enables debugging for IPFC kernel operations.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.