S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-187
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show ips ipv6
show ips ipv6
To display an IPv6 storage routing table, use the
show ips ipv6
command.
show ips ipv6
{
neighbors interface gigabitethernet
slot/port
|
prefix-list interface gigabitethernet
slot/port
|
route interface gigabitethernet
slot/port
|
routers interface gigabitethernet
slot/port
|
traffic interface gigabitethernet
slot/port
}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
You can use the
show ips ipv6 command to display information about IPv6 routing
.
Examples
The following example displays IPv6 neighbors information:
switch#
show ips ipv6 neighbours interface gigabitethernet 1/1
IPv6 Address Age (min) Link-layer Addr State Inter
face
fe80::206:d6ff:fe23:4008 0 0006.d623.4008 S
GigabitEthernet1/1
The following example displays the IPv6 prefix-list information.
switch#
show ips ipv6 prefix-list interface gigabitethernet 1/1
Prefix Prefix-len Addr
Valid Preferred
2000:: 64 2000::205:30ff:fe01:a6be
1000 1000
neighbors
Displays the IPv6 neighbors table.
interface
Displays the interface status and configuration.
gigabitethernet
Displays a Gigabit Ethernet interface.
slot/port
Specifies the slot and port number.
prefix-list
Displays theIPv6 prefix-list table.
route
Displays the IPv6 route table.
routers
Displays the IPv6 routers table.
traffic
Displays the IPv6 traffic table.
Release
Modification
3.1(0)
This command was introduced.