S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
18-17
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 18 P Commands
port-monitor activate
port-monitor activate
To activate the specified port monitor policy, use
port-monitor activate
command. To deactivate the
policy, use the
no
form of the command.
port-monitor activate [
name
]
no port-monitor activate [
name
]
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
If no name is given, the port-monitor activates the default policy. Presently one policy is activated on one
port type. Two policies can be active but on different port-types. If the specified policy is not active, it
is a redundant operation.
Examples
The following example shows how to activate the port monitor default policy:
switch(config)#
port-monitor activate
switch(config)#
The following example shows how to activate the port monitor cisco policy:
switch(config)#
port-monitor activate Cisco
switch(config)#
Related Commands
name
Name of RMON port policy.
Release
Modification
4.1(1b)
This command was introduced.
Command
Description
show port-monitor
Displays all port monitor policies.