S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
21-63
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 21 S Commands
span session source interface
span session source interface
To configure the SPAN traffic in both ingress (rx) and egress (tx) directions, use the
span session source
interface
command in Configuration mode.
span session
session-id
source interface
interface type
Syntax Description
Defaults
None.
Command Modes
Configuration mode
Command History
Usage Guidelines
None.
Examples
The following example shows how to configure the SPAN traffic in both ingress and egress directions.
switch#
config
Enter configuration commands, one per line. End with CNTL/Z.
switch
(config)#
span session 1
switch
(config-span)#
source interface fc 1/5 rx
switch
(config-span)#
source interface fc 1/5 tx
switch
(config-span)#
destination interface fc 1/5
Related Commands
session-id
Specifies the SPAN session ID.
interface type
Specifies the destination interface mapped to a Fiber Channel or FC tunnel.
Release
Modification
1.0(x)
This command was introduced.
3.3(1a)
Enabled SPAN traffic in both ingress (rx) and egress (tx) directions for
Generation 2 Fabric Switches.
Command
Description
show span session
Displays specific information about a Switched Port Analyzer (SPAN)
session.