S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
15-11
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 15 M Commands
member (zone configuration and zoneset-zone configuration submode)
Command History
Usage Guidelines
Create a zone set zone member only if you need to add member to a zone from the zone set prompt.
Examples
The following example shows how to add a member to a zone called zs1 on VSAN 1:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
zone name zs1 vsan 1
switch(config-zone)#
member fcid 0x111112
switch(config-zone)#
The following example shows how to add a zone to a zoneset called Zoneset1 on VSAN 1:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
zoneset name ZoneSet1 vsan 1
switch(config-zoneset-zone)#
member fcid 0x111112
The following example shows how to assign an iSCSI IPv6 address-based membership into a zone:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
zoneset name ZoneSet1 vsan 1
switch(config-zoneset-zone)#
member ipv6-address 2001:0DB8:800:200C::417A
The following example shows how to delete the specified device from a zone:
switch(config-zoneset-zone)#
no member ipv6-address 2001:0DB8:800:200C::417A
Related Commands
Release
Modification
1.0(2)
This command was introduced.
2.1(1a)
Added zoneset-zone configuration submode.
3.0(1)
Added the
IPv6
IP address format.
Command
Description
zoneset (configuration
submode)
Used to specify a name for a zone set.
zone name (zone set
configuration
submode)
Configures a zone in a zoneset.
show zoneset
Displays zone set information.
