S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
8-84
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 8 F Commands
fspf cost
fspf cost
To configure FSPF link cost for an FCIP interface, use the
fspf cost
command. To revert to the default
value, use the
no
form of the command.
fspf cost
link-cost
vsan
vsan-id
no fspf cost
link-cost
vsan
vsan-id
Syntax Description
Defaults
1000 seconds for 1 Gbps.
500 seconds for 2 Gbps.
Command Modes
Interface configuration submode.
Command History
Usage Guidelines
Access this command from the
switch(config-if)#
submode.
FSPF tracks the state of links on all switches in the fabric, associates a cost with each link in its database,
and then chooses the path with a minimal cost. The cost associated with an interface can be changed
using the
fspf cost
command to implement the FSPF route selection.
Examples
The following example configures the FSPF link cost on an FCIP interface.
switch#
config terminal
switch(config)#
interface fcip 1
switch(config-if)#
fspf cost 5000 vsan 1
Related Commands
link-cost
Enters FSPF link cost in seconds. The range is 1 to 65535.
vsan
vsan-id
Specifies a VSAN ID. The range is 1 to 4093.
Release
Modification
1.1(1)
This command was introduced.
Command
Description
show fspf interface
Displays information for each selected interface.
show interface fcip
Displays an interface configuration for a specified FCIP interface.