background image

1

AccuPoint 2 User’s Guide

CONTENTS

Introduction .......................................................................................................... 2

Parts included ....................................................................................................... 3

Operating guidelines and precautions ................................................................... 3

Preparing the instrument for use ........................................................................... 4

Description of the test screen display .................................................................... 5

Selecting the testing site ....................................................................................... 6

Adjusting the display’s contrast ............................................................................. 7

Record count and test recall ................................................................................. 7

Operating procedure ............................................................................................. 8

Setting the time and date .................................................................................... 10

Powering the AccuPoint 2 system ....................................................................... 10

Recharging the batteries ..................................................................................... 10

Installing new batteries ....................................................................................... 11

Sleep mode ........................................................................................................ 11

Communicating with the Data Manager software ................................................ 11

Downloading test results to the Data Manager software ...................................... 11

Setting thresholds in the instrument ................................................................... 12

Cleaning the instrument ...................................................................................... 12

Troubleshooting .................................................................................................. 13

Regulatory information ....................................................................................... 14

Replacement parts/accessories .......................................................................... 15

Warranty ............................................................................................................. 15

Customer service/contact information ................................................................. 15

Neogen Corporation 

 620 Lesher Place 

 Lansing, MI 48912

800/234-5333 or 517/372-9200 

 [email protected] 

 www.neogen.com

AP2 Users Guide1a.indd   1

10/20/2009   3:47:37 PM

Summary of Contents for AccuPoint 2 ATP

















Reviews: