![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_212531142.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-74
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
ssm enable feature dmm
ssm enable feature dmm
To enable DMM, use the
ssm enable feature dmm
command in configuration mode. To disable DMM,
use the
no
form of the command.
ssm enable feature dmm
{
force
{
interface fc
slot/port
|
module
slot
} |
interface fc
slot/port
|
module
slot
}
no ssm enable feature dmm
{
force
{
interface fc
slot/port
|
module
slot
} |
interface fc
slot/port
|
module
slot
}
Syntax Description
Defaults
Disabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Starting with NX-OS 4.1(1b), DMM must be enabled using the
ssm enable feature dmm
command
before using the SLD tool.
Examples
The following example shows how to enable DMM on a module:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ssm enable feature dmm module 1
The following example shows how to enable DMM on an interface:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ssm enable feature dmm interface fc 1/1 - 4
The following example shows how to force a reload on some of the ports on a module:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ssm enable feature dmm force interface fc 1/1 - 8, fc 1/13 - 16
force
Forces a switching module reload.
interface
Specifies the interface.
fc
slot/port
Specifies the Fiber Channel slot and port numbers.
module
slot
Specifies the SSM module slot number.
Release
Modification
3.2(1)
This command was introduced.