S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-8
Cisco MDS 9000 Family Command Reference
OL-18089-02, Cisco MDS NX-OS Release 4.x
Chapter 2 A Commands
aaa authentication login password-aging enable
aaa authentication login password-aging enable
To configure password aging notifcation from AAA server , use the
aaa authentication login
password-aging enable
in configuration mode. To revert to factory defaults, use the
no
form of the
command.
aaa authentication login password-aging enable
no aaa authentication login password-aging enable
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Specify the currently configured command preceded by a
no
in order to revert to the factory defaults.
Note
This command is supported by the protocol. If you try to use the RADIUS protocol by
enabling this feature, RADIUS will generate a SYSLOG message and authentication will fall back to
local.
Examples
The following example enables password aging notification from AAA server:
switch#
config terminal
switch(config)#
aaa authentication login password-aging enable
The following example reverts to the Password Authentication Password (PAP) authentication method
(default):
switch(config)#
no aaa authentication login password-aging enable
Related Commands
Release
Modification
3.2(1)
This command was introduced.
Command
Description
show aaa
authentication login
password-aging
Displays the status of the password aging notification (enabled/disabled).