install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
To select a pre-made timer:
1.
In Device Control section, select the
[Timer]
device button (A/B/C), it will illuminate orange.
2.
The PixPad will change showing the available
pre-made timers, as shown on the right.
Select the desired timer unit in the PixPad,
either
[1 Min], [2 Min], [5 Min], [10 Min], [15
Min], [30 Min], [60 Min]
or
[90 Min]
PixButton.
The display will show the selected timer and
the timer will
automatically
start playing,
updating the Multi-View and display.
The [<] motion control button will illuminate
orange, signifying that the countdown is
running, as shown on the right.
To enter a custom timer:
1.
In Device Control section, select the
[Timer]
device button (A/B/C), it will illuminate orange.
2.
The PixPad will change showing the available
pre-made timers.
Select the
[Set Time]
PixButton, as shown on
the right.
3.
The PixPad will change showing a numeric
pad, as shown on the right.
Enter
the desired time.
As numbers are selected the display will
update, starting with seconds.
For example to enter 1 min and 30 seconds
push [1], [3], [0] or [9], [0] for 90 seconds.
2.5.12
