install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
7.
For each input select Icon Type, which will determine
which icon will appear on the Control Panel and
SoftPanels.
Select the drop down menu and select either:
Camera, VTR, None, Router, Computer, Server,
DVD, Satellite
or
Truck,
as shown on the right.
8.
For each input select its native video Aspect Ratio,
either
16:9
or
4:3
from the Aspect Ratio drop down
menu.
Use the
Aspect
Correction
drop down menu to
select the desired treatment that will be applied when
using this source in a show that has the opposite
aspect ratio.
You may also set these settings from the control
panel with Source Controls, see section 4.6.
9.
If an audio input is being used, select either
Analog
(14/15)
or
HDMI
under the Audio In drop down menu,
as shown on the right.
On LE models use input 1, on LS models use input 5.
NOTE: a valid video source must be attached to the
input card for audio to be recognized.
10.
Click on the
OK
button to save and close the Input
Assignments window.
1.8