install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.12.3
To load a macro in the Editor:
1.
In the Macro Menu Bar, click on the
Open
button, as shown on the right, or click on the
Menu and select New…
An Open pop-up window will appear.
2.
Select
the desired macro (.tln file) to edit
and click on
Open.
Note if you record using the Macro Editor,
as described in section 4.12.2, the macro
will automatically be opened in the Action
List, in this case Steps 1 and 2 are not needed.
To modify a macro command:
1.
Select
a step in the Action list with the
mouse, as shown on the right.
The step will highlight white and the
Details Panel will display the editable fields of that
command, each command will have slightly different
panel.
2.
Modify
the top timing information in the Details Panel.
The top portion of the Panel is the same for every
command, as shown on the right.
Non-editable
command name
, which
appears in the Action field of the Action list
Editable
Note field,
which appears in the
Note field of the Action List.
This field is useful for adding cue points
and reminders in a longer macro.
Editable
Hold frames
field, which
represents the amount of frames the selected
action/command will wait until triggered by the macro.
0 (zero) frames signifies the command will happen
instantly, if multiple commands are all set to zero, they all
will occur simultaneously similar to a SnapShot memory.
