install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
8.9
To control a remote system with a SoftPanel:
1.
Open a web browser, like Internet Explorer, on
a remote computer, as described in section 8.6.
2.
In the address bar, enter the external IP address
of the remote Broadcast Pix system. In most
causes this is not the assigned IP address on
the Server NIC card. If the external IP address
is not known, on the Broadcast Pix Server go to
www.whatsmyip.com.
Your IP address will be displayed in the web
browser, for example 67.152.12.226.
Enter that IP address followed by the Web
Server Port number assigned, for example:
http://67.152.12.226:26000/softpanel1000.html
It is important to add the colon : between the IP
address and Web Server Port.
This will open a 1ME SoftPanel.
6.
Click on
return
on the keyboard to launch the
SoftPanel in the web browser.
7.
If at any time the SoftPanel loses connection to
the main Server, the words
Reconnect
will
appear in the upper right hand corner of the
SoftPanel. When the main Server is back up
and connected to a show, clicking on Reconnect
will join the show.