install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
To operate a Countdown Timer:
1.
Activate the Timer window and set it as a
Countdown timer,
as described above.
2.
Right-click
anywhere on the timer window and
and a pop-up menu will appear.
3.
Select
Set countdown time…
from the available
list.
This will open the Set timer time window.
4.
In the pop-up window
enter
the hours, minutes
and/or seconds, as shown to the right.
5.
Click on
OK
to save and exit the window. The time
that you entered will now appear in the Countdown
timer window.
6.
To start and pause the countdown,
left-click
on the
green play/triangle
button in the lower right hand
corner of the timer window. You may also double-
click in the middle of the timer to start/pause the
countdown.
7.
To stop the countdown,
left-click
on the
red stop/
square
button in the lower left hand corner of the
timer window.
To operate a Count Up (Stopwatch) Timer:
1.
Activate the Timer window and it as
Stopwatch
timer,
as described on the previous page.
2.
To start/pause the stopwatch,
left-click
on the
green play/triangle
button in the lower right hand
corner of the timer window. You may also double-
click in the middle of the timer to start/pause the
countdown.
3.
To stop and reset the stopwatch zero,
left-click
on
the
red stop/square
button in the lower left hand
corner of the timer window.
2.5.11
