install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
To assign the device controls to Timer Control:
Press the [
Timer]
wildcard [Device Select] button (A/B/C)
and it will illuminate orange and the following device controls will be appear.
Timer Control device controls:
PixPad
To select which countdown
timer to use
Motion Controls
Start, stop and reset timer
When you press the Timer Control device button, the active timer last used will be
selected.
The display indicates 3 pieces of information:
1.
The top left corner always shows status (running, stopped and type) of the timer/
stopwatch. In this case, the words
Timer: Countdown from 00:01:00
indicates the
type of counter/timer. When the timer is stopped, the top right of the display will
show the last selected countdown time.
2.
The time in the bottom right of the display indicates the running time, either counting
up or down, in this case
00:00:11.
3.
The bottom left side displays what the countdown timer will do once it reaches 0
(zero), either stopping at zero or counting back up to show the elapsed time, in this
case it will stop at zero.
Display
shows the active countdown timer and current running
timer.
2.5.12
