Xerox PHASER 8560MFP, Service Documentation

Page: 32 / 296

10/2006
2-6 Phaser 8510/8560MFP Multifunction Product
NVRAM Reset
Initial Issue Error Messages and Codes
Table 2 summarizes system parameters not affected by an NVRAM Reset.
Fax Send Setup Transmission Report Never No
Reduced Image (8560 only) Off Yes
Redial Count 3 No
Redial Time Interval 15 No
Auto Resend Policy Unsent Pg Yes
Auto Resend Count 3 Yes
Document Type Mixed No
Resolution Standard No
Transmission Header (8560 only) On No
Fax Receive Setup Paper Suplly Tray 2 Yes
Fax Receive On Yes
Answer Delay 0 Yes
Secure Receive (8560 only) Off Yes
Secure Receive Password (8560 only) None Yes
Junk Fax Prevention Off Yes
2-Sided Fax Printing 1-1 No
Fax Configuration Line Name None Yes
Dial Type Tone Yes
Line Monitor Volume 2 No
Auto Activity Report Off No
Starting Rate Super G3 Yes
Error Correction Mode On Yes
Fax Configuration Dial Pause 3 No
Dial Delay 0 No
Max Compression JBIG/MMR No
File Security Daily Removal Off Yes
Remove At 00:00 Yes
Age-based Removal Off Yes
Remove at Age 24 Yes
Paper Handing Setup Load Paper Timeout 3 min. No
Tray 1 Mode Dynamic No
Tray 1 Prompt 30 sec. No
Tray 2 ~ [N] Mode Dynamic No
Tray 2 ~ [N] Prompt None No
Letter/A4 Substitution On No
Custom Units Inches/mm No
Cleaning Page Source Highest No
Table 1 Parameters Reset with the Service Diagnostics NVRAM Reset Command
Menu Parameter Default Required
System Controls Startup Page On No
Auto Clear Timeout 60 sec. No
Power Saver Timeout 4 hours No
Date and Time None No
Intelligent Ready On No
Default Function Copy No
Color Copy Password Disabled No
Print Job Interrupt (8560 only) On No
Paper Tray Setup Tray 1 Paper - Media Size Guide Size No
Tray 1 Paper - Media Type Plain No
Tray 2 Paper - Media Type Plain No
Tray 3 Paper - Media Type (if installed) Plain No
Tray 4 Paper - Media Type (if installed) Plain No
Print Defaults Setup Paper Source Auto No
2-Sided Printing Disabled No
PS-PCL Setup Pitch 10.00 No
Point Size 12.00 No
Symbol Set PC8 No
Oreientation Portrait No
Form Length 6 No
Line Termination On No
Draft Mode Off No
Color Mode Color No
Scan Default Setup Color Mode Color No
Document Type Mixed No
Scan Resolution 100x100 No
Laser Original Off No
Scan Main Scan To Public No
Scan Resolution 100x100 No
Original Size Automatic No
Auto Suppression Off No
Laser Original Off No
Table 2 System Parameters Not Affected by an NVRAM Reset
Parameter Comment
Metric Defaults
MAC Address Set by the Configuration Card
Serial Number
Model number
Table 1 Parameters Reset with the Service Diagnostics NVRAM Reset Command
Menu Parameter Default Required